Fiery KM-C3130 Printing Manual page 45

2
2-11 Printing from applications with Mac OS X Native mode computers
7.Choose Printer Features and specify the appropriate settings for your job.
Choose print categories
These print options are specific to the Fiery S300 and the copier; you will have to
choose specific Feature Set categories to see all the options. They override settings in
Fiery S300 Printer Setup, but can be changed from Command WorkStation,
Fiery WebSpooler, or Fiery Spooler.
If you choose Printer's default, the job prints according to the settings specified
in Setup.
For more information about these options and overrides, see
Some print options, including Soft Collate, Soft Reverse Order, and Manual Duplex
that are selectable from an application or the PostScript printer driver, are similar to
the print options available from the Printer Features menu. In these cases, specify the
print option from the Printer Features menu. The application or the PostScript printer
driver may not set up the file properly for printing on the Fiery S300, which may cause
an unexpected printing error and take longer to process.
You can set some print options from an application (for example, Reverse Order
Printing or Collation). In these cases, use the print option to perform the function,
rather than setting it from the application. The application may not set up the file
properly for printing on the Fiery S300 and take longer to process.
Choose a specific
Feature Set category
Appendix A.