Fiery KM-C3130 Printing Manual page 137

A
A-7 Print Options
Option and settings
(default setting is underlined)
Enable Trapping
Printer's default/On/Off
Gloss Print
Off/On
Group Name
Group Password
Hole Punch
Off/Left/Top
Image Smoothing
Printer's
default/Automatic/Off/On/Below 90
ppi/Below 150 ppi/Below 200
ppi/Below 300 ppi
Instructions
Description
Specify whether the job should
automatically trap text and graphics
independently of their application.
Specify if you want to gloss the printing
like a photograph.
If Printing Groups is enabled, the Fiery
S300 Administrator has assigned users to
print groups, and passwords to each
group. Enter the appropriate Group
Name for the print job.
If Printing Groups is enabled, the Fiery
S300 Administrator has assigned users to
print groups, and passwords to each
group. Enter the appropriate Group
Password for the print job.
Specify if you want to punch holes for
your job.
Select On to minimize grainy output
when printing low-resolution images.
When you select On, image smoothing
will be enforced on all images.
Select Automatic if you want to use
smoothing only when it makes a visible
difference. When the image is below 150
ppi, image smoothing will be applied
automatically.
Select Below 90 ppi, Below 150 ppi,
Below 200 ppi, or Below 300 ppi to
apply image smoothing to those images
whose effective resolution is below the
specified ppi value that you choose.
Enter instructions for the operator about
the job.
Requirements, constraints,
and information
The Printer's default setting reflects the
setting specified in Fiery S300 Setup.
This function is available when Media
type is Plain Paper and Duplex is set to
Off.
The Folding Finisher must be installed in
order to use this option.
The Printer's default setting reflects the
setting specified in Fiery S300 Setup.
If you create an EPS file in Photoshop,
the settings specified from PhotoShop
take effect.