Fiery KM-C3130 Printing Manual page 141

A
A-11 Print Options
Option and settings
(default setting is underlined)
RGB Source Profile
Printer's default/EFIRGB/sRGB (PC)/
Apple Standard/Other/Source-1/
Source-2/Source-3/Source-4/Source-5/
Source-6/Source-7/Source-8/Source-9/
Source-10/None
Save Fast Reprint
Off/On/RIP only
Sorter Mode
Off/Electronic Sort
Spot Color Matching
Printer's default/Off/On
Stapling Mode
Off/Corner/Left 2-points/Top
2-points/Center and Folding
Starting Distribution Number
1-999
Description
Specify a source color space definition for
printing RGB images, objects, and text.
Specify whether to save a job's raster data
to disk after printing, so the data will be
available later for reprinting (without
reRIPping).
Specify how to output
multiple-page/multiple-copy jobs.
Select Off to print specified PANTONE
colors in your job using the current
CMYK Simulation and CMYK
Simulation Method.
Select On to activate the PANTONE
Lookup Table. The Fiery S300 prints
specified PANTONE colors in your job
by matching the CMYK print blend to
the same color from the PANTONE
library.
Specify whether or not to staple
completed print jobs.
Specify a starting copy number for
multiple copy jobs. The number appears
as a watermark in the center of the page.
Requirements, constraints,
and information
The Printer's default setting reflects the
setting specified in Fiery S300 Setup.
For Windows, choose Expert Color as
the Color Mode to access this option.
For more information, see the
Color Guide.
With this option set to On, all print
option settings remain with the saved
raster data each time the job is reprinted.
To print the job with new print option
settings, you must remove the raster data
and reRIP the job.
N :
OTE
The Printer's default setting reflects the
setting specified in Fiery S300 Setup.
For Windows, choose Expert Color as the
Color Mode to access this option.
For more information, see the
Color Guide.
The Left 2-points, Top 2-points, and
Center and Folding options are only
available with the Folding Finisher
installed.
Corner is only available with the Folding
Finisher or Single Staple Finisher
installed.
The extension memory or the hard disk
drive in the copier must be installed.