Fiery KM-C3130 Printing Manual page 36

2
2-2 Printing from Mac OS Computers
3. Click the AdobePS icon to select it.
Make sure AppleTalk is set to Active.
N :
OTE
4. If your network is divided into zones, select the zone in which the Fiery S300
is located.
5. Select the Fiery S300 by <Server Name>_<Queue Name>_ from the "Select a
PostScript Printer" list.
The names of all supported printers in the zone appear in the list on the right.
If your system administrator has not enabled the connection to the Print
N :
OTE
queue or the Direct connection, the corresponding names will not appear in this list.
For example, if your site has an operator who controls the flow of print jobs from
Command WorkStation, you may be able to print only to the Hold queue. For more
information on enabling print connections, see the
6. Close the Chooser window.
The Fiery S300 remains selected as the current printer until you select a new printer in
the Chooser.
Configuration Guide.