IONODES ATOMAS-MINI-DUAL User Manual page 43

Under the Configuration section, select the Video Input > General tab to perform the following operations:
PTZ – This sub-section allows you to configure general parameters related to PTZ functionality
•
o Enable Move Timeout – sets the timeout for stopping a move PTZ command
o Include Built-In Custom Commands – allows the encoder's PTZ module to use built-in Custom
Commands
o 2-Wire Command Delay – sets the command delay for cases where the serial connection to the
PTZ controller is working in 2-wire mode
JPEG Image Upload – This section allows you to configure JPEG Upload functionality.
•
support@ionodes.com | https://imaging.ionodes.com | 1-450-696-1060
43