IONODES ATOMAS-MINI-DUAL User Manual page 27

Under the Configuration section, select the Network tab to perform the following operations:
Network Interface – Set the encoder's IP parameters; DHCP or static IP information. The user can also
•
choose the allowed Ethernet Speed in order to increase compatibility with 3
equipment that the encoder is directly connected to.
Host Name Configuration – Set the encoder's network name.
•
Streaming – Set the MTU size for all media related RTP packets sent on the network; avoid changing this
•
setting unless absolutely necessary.
support@ionodes.com | https://imaging.ionodes.com
rd party networking
| 1-450-696-1060
27