IONODES ATOMAS-MINI-DUAL User Manual page 40

PTZ – This section allows you to configure PTZ control behaviour.
•
o Enable – Allows you to enable PTZ support on this encoder module.
o Camera ID – Logical ID associated to the PTZ controller connected to this encoder module.
o Control Protocol – PTZ protocol used for communicating with the PTZ controller.
o Serial Port – Serial port instance on which the PTZ controller is connected.
o Override Default Speed – Allows you to set a different default speed for PTZ movements.
o Override Number of Programmable Presets – Allows you to set the number of PTZ presets
that can be programmed via the encoder module.
o Enable Proportional Pan/Tilt Speed – Allows the encoder to automatically modify the Pan/Tilt
Speed based on the current Zoom position (the further you Zoom In the lower the Pan/Tilt
Speed)
support@ionodes.com | https://imaging.ionodes.com | 1-450-696-1060
40