Cleaning And Maintenance - MALTEC CH5000DWW WiFi Instruction Manual

10. Do not plug other high-power electrical appliances into the same power outlet. The
heater must not be located immediately below a socket outlet.
11. Children, the elderly or patients who do not have the ability to take care of themselves
should be taken care of when they are unattended, and the heaters must be turned off
when unattended.
12. Do not pull the power cord directly to move the appliance.
13. If the heater fails, immediately shut it down and unplug the power cord, send it to the
nearest service center for professional repair.
14. If the power cord is damaged, use only the same type of power cord as the original for
replacement. The power cord must be replaced by the manufacturer or its authorized
service agent.

Cleaning and maintenance

1. Before cleaning and maintenance unplug the power cord firstly, disconnect the power,
let the unit cool for 10 minutes before cleaning.
2. Do not rinse the appliance body with water, lightly wipe it with a soft cloth containing a
small amount of neutral detergent, then wipe dry. Do not use solvents such as gasoline.
3. After cleaning and maintenance wait until the appliance becomes fully dry before using
or connection to power.
4. Please unplug the power plug from the socket when not in use, to avoid dust cover the
appliance with a plastic bag. It is best to use the original packaging bags to store the unit
in a dry place.
CE declaration
Malis B. Machoński sp. k. Declares that the MalTec CH5000DWW WiFi Glass Convector
Heater meets all the requirements of the LVD 2014/35 / EU, EC 2014/30 / EU directive and
meets the following standards:
EN 60335-2-30:2009+A11:2012
EN 60335-1:2012+AC:2014+A11:2014+A13:2017
EN 62233:2008
Importer:
Malis B. Machoński sp. k.
ul. Zbożowa 2E, Wysogotowo
62-081 Przeźmierowo
www.maltec.pl
EN 55014-1:2017
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
19/29