Structure diagram
A: Display-board
B: Front panel
C: Foot
D: Wall-mounted parts
E: Back panel
Technical Parameters
Product model
Rated voltage
Rated frequency
Rated power
Foot installation
1. Turn the machine-body upside down, take out the three ST4 * 12 screws and feet
supplied with the appliance.
2. Align the screw holes on the feet with the mounting holes on the bottom of the rear
case, and then insert the screws through the circular holes in the feet, tighten the screws.
3. After the installation is complete, turn the body and flip it right, you can use it now.
CHX-20GR-B WIFI
220-240 V AC
50/60 Hz
2000 W
13/29