MALTEC CH5000DWW WiFi Instruction Manual page 17

5.1 Long press " " 3 seconds to open the weekly timing mode, " " in the display light
up, into the weekly timing mode;
5.2 In weekly mode, press the " " button once, and the number "1" of the week
displayed on the display will start to flash. Press the " " or " " button to set the week.
The number 1-7 indicates Monday to Sunday. After setting a good week, press the " "
key again, the number of the display period begins to flash, you can press the " " or "
" key to set the time period, a day can set 6 time period; Press the " " key again to
show that the number of hours begins to flash, and the " " is lit, indicating that the time
for setting the start of heating can be set by pressing the " " or " " key; Press the "
" key again to show that the number of minutes begins to flash. Press the " " or " "
key to set the minute; Press the " "button again, the number of hours flashes again, At
the same time " "light upindicate the time setting for heating off ,Press the " " or " "
button to set the hour; Press the " " key again to show that the number of minutes
begins to flash. Press the " " or " " key to set the minute; Press the " " button
again, the temperature display number begins to flash, the temperature can be set during
this period of time, when the ambient temperature is greater than or equal to this set
temperature, the heater will turn off the heating function, into standby.
5.3 After setting up Monday, repeat the operation of 5.2 to set the heater on or off for all
periods of time within one week. A total of 42 time periods can be set up for 7 days to set
the heater to be heated or turned off.
5.4 Weekly timing function, you must first set the current time, for example, today is
Wednesday 3, the time is 08:30, then you must first set Wednesday, and then set the time
according to the 3 operation completion. After the setting is complete, the heater will run in
weekly mode according to the set time period.
5.5 Without cutting off the power supply, all the above settings will be saved without
repeated settings.
17/29