Table of Contents
Advertisement
Available languages
Available languages
Wall mounting method
Please note that this product must be installed at least 15 cm from the floor and 50 cm
from the ceiling.
Perform the following wall mount operation.
1.
Drill two holes (2000W model with spacing 550 mm; 1500W model with spacing 420
mm)
2.
Insert the supplied anchors (with a diameter of 8mm and depth of 40mm) in the
holes, then use a screwdriver to tighten in screws with anchors, screws must
protrude 6mm from the anchor head, finally hang the product in the hook holes on
the back.
Note: Before drilling, make sure that no wires or other pipelines are under the wall to
prevent damage to the pipes.
14/29
Advertisement
Table of Contents
