Cleaning And Storage; Packing List - MALTEC CARBON720W WIFI Instruction Manual

Carbon panel heater
Table of Contents

Advertisement

Available languages

Available languages

COULD CAUSE DAMAGE OR PERSONAL INJURY. IF THE PROBLEM STILL PERSISTS,
PLEASE CONTACT THE DISTRIBUTOR.

Cleaning and Storage

Before cleaning your heater, switch off the heater and allow it to cool. Disconnect the
electricity supply to the appliance. The outside can be cleaned by wiping it over with a soft
damp cloth and then dried. Do not use abrasive cleaning powders or furniture polish, as
this can damage the surface finish. To release the heater from the wall, for cleaning or
redecoration, just open the screw bolt cap and unscrew the bolts to take off from the wall.
For short term storage, just plug off the heater and leave it away; for long term storage,
you can dismantle from the wall or cover it with some material.

Packing List

-Heater: 1 piece
-Instruction manual: 1 piece
-Remote control:1 piece
-Free standing 2 x plastic feet
-Accessories for wall mounting:
4 x
plastic rail
4 x
metal screw
CE declaration
Malis B. Machoński sp. K. Declares that the Maltec infrared heater CARBON720W WIFI
meets all the requirements of the LVD 2014/35 / EU, EC 2014/30 / EU directive and meets
the following standards:
62321-4:2013+AMD1:2017
62321-5:2013
62321-6:2015
62321-7-1:2015
62321-7-2:2017
62321-8:2017
Importer:
Malis B. Machoński sp. k.
ul. Zbożowa 2E, Wysogotowo
62-081 Przeźmierowo
www.maltec.pl
EN 55014-1:2017
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 60335-1:2012+A11:2014
12/12

Advertisement

Table of Contents
loading

Table of Contents