Cleaning And Storage; Packing List - MALTEC CARBON770W-PRO WiFi Instruction Manual

Cleaning and storage

Before cleaning your heater, switch off the heater and allow it to cool. Disconnect the
electricity supply to the appliance. The outside can be cleaned by wiping it over with a soft
damp cloth and then dried. Do not use abrasive cleaning powders or furniture polish, as
this can damage the surface finish. To release the heater from the wall, for cleaning or
redecoration, just open the screw bolt cap and unscrew the bolts to take off from the wall.
For short term storage, just plug off the heater and leave it away; for long term storage,
you can dismantle from the wall or cover it with some material.

Packing list

 Heater: 1 piece
 Instruction manual: 1 piece
 Remote Control :1 piece
 Accessories pack 1 set:
◦ 4x plastic rail
◦ 4x metal screw
Disposal of electrical equipment
The symbol of the crossed-out wheeled waste container placed on the
products informs that used electrical and electronic equipment (hereinafter
also "waste equipment" or "electro-waste") may not be disposed of with
municipal waste. By throwing e-waste into the container, you pose a threat
to the environment. Used equipment may contain substances (e.g. lead,
cadmium, chromium, bromine, mercury, freon) that are dangerous to
human health and life and to the environment. By sorting and handing over used
equipment for processing, recovery, recycling and disposal, you protect the environment
against pollution and contamination, you contribute to reducing the use of natural
resources and lowering the production costs of new equipment.
CE declaration
Malis B. Machoński sp. k. Declares that the Maltec Infrared Heater CARBON770W-PRO
WiFi meets all the requirements of the LVD Directive 2014/35/EU, EC 2014/30/EU and
meets the following standards:
EN 60335-2-30:2009+A11:2012+A1:2020+A12:2020
EN 60335-1:2012+A11:2014+A13:2017+A1:2019+A2:2019+A14:2019
EN 60335-2-30:2009+A11:2012+A1:2020
EN 60335-1:2012+A11:2014+A13:2017+A1:2019+A2:2019+A14:2019
EN 62233:2008
EN 62233:2008
EN 62311:2008, EN 50665:2017
EN 301 489-1 V2.2.3(2019-11)
EN 301 489-17 V3.2.4(2020-09)
EN 55014-1:2017+A11:2020, EN 55014-2:2015
EN IEC 61000-3-2:2019, EN 61000-3-3:2013+A1:2019
EN 300 328 V2.2.2 (2019-07)
21/34