Setting The Emulation Mode - Kyocera KM-1815 Advanced Operation Manual

Setting the Emulation Mode

This section explains the procedure to select the emulation mode.
Available emulations are: Line Printer, IBM Proprinter, DIABLO 630, EPSON LQ-850, PCL6, KPDL,
and KPDL (AUTO).
If KPDL (AUTO) emulation is selected, the machine will automatically switch from KPDL to a
alternative emulation mode in accordance with the data to be printed. If KPDL emulation is selected,
you can select whether or not to have a report printed out automatically whenever a KPDL error
occurs during printing.
1 Press the System Menu/Counter key. The System Menu/Count screen is displayed.
2
Press the
Setting and press the Enter key. The Printer
Setting screen is displayed.
3 Press the
and press the Enter key. The Emulation screen is
displayed.
4 Press the
emulation mode, and press the Enter key.
5 If you selected Line Printer, IBM Proprinter, DIABLO 630, EPSON LQ-850, or PCL6, the
message display shows Completed and returns to the Printer Setting screen.
6 If you selected KPDL, the KPDL Err Rep screen is
displayed. Select whether or not a report is to be
printed out upon a KPDL error.
key or the key to select Printer
key or the key to select Emulation
key or the key to select the desired
Printer Settings
Sys. Menu/Count.:
* Common Setting
Copy Setting
Printer Setting
Exit
Printer Setting:
Back
*
Emulation
Exit
Emulation:
* * PCL6
*
KPDL
KPDL(Auto)
Cancel
KPDL Error Rep.:
Off
* On
Cancel
3-9