Kyocera KM-1815 Advanced Operation Manual page 156

Use of paper in these conditions can lead to illegible printing, misfeeding, and paper jams, and can
shorten the life of the machine. In particular, avoid using paper with a surface coating or other
surface treatment. The paper should have as smooth and even a surface as possible.
Composition
Do not use paper that has been coated or surface-treated and contains plastic or carbon. The heat
of fusing can cause such paper to give off harmful fumes.
Bond paper should contain at least 80 % pulp. Not more than 20 % of the total paper content should
consist of cotton or other fibers.
Paper Size
Cassettes and an MP tray are available for the paper sizes listed in the table below. The
dimensional tolerances are ±0.7 mm (±0.0276 inches) for the length and width. The angle at the
corners must be 90° ±0.2°.
Paper Feed Source
Cassette or MP Tray
MP Tray only
Smoothness
The paper should have a smooth, uncoated surface. Paper with a rough or sandy surface can
cause voids in the printed output. Paper that is too smooth, however, can cause multiple feeding
and fogging problems. (Fogging is a gray background effect.)
Paper Size Dimensions
Letter 8
Legal 8
ISO A4 210 × 297 mm
ISO A5 148 × 210 mm
JIS B5 182 × 257 mm
Folio 210 × 330 mm
Oficio II 8
Executive 7
ISO B5 176 × 250 mm
16K 197 × 273 mm
Statement 5
ISO A6 105 × 148 mm
JIS B6 128 × 182 mm
Envelope #10 4
Envelope #9 3
Envelope Monarch 3
Envelope #6 3
Envelope DL 110 × 220 mm
Envelope C5 162 × 229 mm
Hagaki 100 × 148 mm
OufukuHagaki 148 × 200 mm
Youkei 2 114 × 162 mm
Youkei 4 105 × 235 mm
Custom 80 to 216 mm × 148 to 356 mm (3.15 to 8.50 inches
× 5.83 to 14.02 inches)
× 11 inches
1/2
× 14 inches
1/2
× 13 inches
1/2
× 10 inches
1/4 1/2
× 8 inches
1/2 1/2
× 9 inches
1/8 1/2
× 8 inches
7/8 7/8
× 7 inches
7/8 1/2
× 6 inches
5/8 1/2
Appendix
Appendix-3