Auto Panel Reset; Enabling Auto Panel Reset - Kyocera KM-1815 Advanced Operation Manual

System Settings

Auto Panel Reset

The Auto Panel Reset function automatically returns the machine to the default settings when no
operation has been performed on the machine or operation panel for a pre-set period of time
(between 5 and 495 seconds). The factory default setting for the pre-set period is 90 seconds.
Note
The current exposure mode and the original quality mode settings will not change.

Enabling Auto Panel Reset

1
Press the System Menu/Counter key. The Sys. Menu/Count screen is displayed.
2 Press the
Set and press the Enter key. The Date/Timer Set
screen is displayed.
3
Press the
Reset and press the Enter key. The Auto Panel
Reset screen is displayed.
4
Press the
Off. Press the Enter key. The message display shows
Completed and returns to the Date/Timer Set
screen.
5-24
key or the key to select Date/Timer
key or the key to select Auto Panel
key or the key to select either On or
Sys. Menu/Count.:
System Setting
Adjust
Date/Timer Set.
Exit
Date/Timer Set.:
Sleep Timer
Err. Clear Timer
Auto Panel Reset
Exit
Auto Panel Reset:
Off
* On
Cancel