Network Settings; Appletalk Setting - Kyocera KM-1815 Advanced Operation Manual

Printer Settings

Network Settings

Network settings must be accomplished in order to enable network printing as well as to send
e-mail. This section explains the settings required in order to use the network functions of this
machine.
Notes
•
•
Network settings are accomplished in accordance with the following flow.

AppleTalk Setting

Turn this setting On when this machine is connected to an Apple Macintosh computer.
1 Press the System Menu/Counter key. The System Menu/Count screen is displayed.
2 Press the
Setting and press the Enter key. The System
Setting screen is displayed.
3 Press the
Setting and press the Enter key. The Network
Setting screen is displayed.
3-4
Be sure to get the approval of your network administrator and be prepared with the appropriate
information before you attempt to set the IP address.
Always restart this machine after you have completed these network settings in order to
properly register the content of those settings in the machine. Refer to Restarting the
Machine on page 5-15.
Start
AppleTalk (On/Off)
TCP/IP (On/Off)
DHCP (On/Off)
DHCP On
Restart (Refer to Restarting the Machine on page 5-15.)
key or the key to select System
key or the key to select Network
DHCP Off
Subnet Mask Address Entry
Default Gateway Address Entry
End
Sys. Menu/Count.:
Report
*
Counter
System Setting
System Setting:
* Back
Network Setting
Parallel Setting
IP Address Entry
Exit
Exit