Wireless Network Settings - Kyocera ECOSYS P6130cdn Operation Manual

Installing and Setting up the Machine > Default Settings of the Machine

Wireless Network Settings

When the optional Wireless Network Interface Kit is installed on the machine and the connection settings are configured,
it is possible to print in a wireless network (wireless LAN) environment. Information on the wireless network settings,
refer to the following:
IB-51 User's Manual
Manual setting from the printer is not supported on this device.
11Set the default gateway.
NOTE
You can set any value between 000 and 255.
Select the [▲] or [▼] key to enter a number.
Select the [◄] or [►] key to move the cursor left or right.
12Select the [OK] key.
IMPORTANT
After changing the setting, restart the network from System Menu, or turn the
machine OFF and then ON.
Restart Printer (page 7-23)
NOTE
The network can be configured from the computer by using Command Center RX.
Command Center RX User Guide
2-16