Network Settings - Kyocera ECOSYS PA2100CX Operation Manual

Setup and Registration (System Menu) > System Menu

Network Settings

[Menu] key > [▲] [▼] key > [Network Settings] > [►] key
Configure network settings.
Item
*1
Communication
SSL Server
IPSec
Bonjour
*1
Wi-Fi Direct
*1
Wi-Fi
Wired Network
NetBEUI
*1
Wi-Fi Direct
*1
Wi-Fi
Wired Network
SNMPv3
*1
Wi-Fi Direct
*1
Wi-Fi
Wired Network
FTP(Server)
*1
Wi-Fi Direct
*1
Wi-Fi
Wired Network
Select the network to be used for the send function and the network authentication.
Value: Wi-Fi, Wired Network
Select whether to use SSL.
Value: Off, On
Select whether to use IPSec.
Value: Off, On
Select whether to use Bonjour.
Value: Off, On
NOTE
This function is displayed when TCP/IP is set to [On].
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Bonjour] is set to [On].
Selects whether to receive documents using NetBEUI.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [NetBEUI] is set to [On].
Select whether to communicate using SNMPv3.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [SNMPv3] is set to [On].
Select whether to receive documents using FTP.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [FTP(Server)] is set to [On].
6-13
Description
*2
*2
*2