Keeping The Paper In The Custody - Kyocera KM-3650W General Operations Manual

Paper that has already been
used for printing
Very slippery paper
Very sticky paper
Very thin and soft paper
OHP Film
CAUTION
Do not use the paper with staple, or do not use such conductive paper as aluminium foil and
carbon paper.
Such paper may become cause for the fire.
NOTE
(1) Print image may become light if printed on a paper of rough surface.
(2) Print image may become defective if the print paper is much curled.
(3) It will become a cause for paper jam, poor quality image or crease of paper if you
use a paper that does not satisfy the specification.
(4) Do not use a paper of which surface is very special, such as thermal paper, art paper,
aluminium foil, carbon paper and conductive paper.
1. 6. 2

Keeping the paper in the custody

Keep the paper in the custody taking care of the following matters.
1. Do not expose the paper to the direct sunlight.
2. Keep the paper away from high humidity. (It must be less than 70%)
3. Put the paper on a flat place
4. If you keep the paper in the custody, which you have already unpacked, put it into the
polyethylene bag to avoid the humidity.
1-13 Chapter 1 Before Use