Kyocera KM-3650W User Manual page 43

Enable Clipping:
When this is checked, the value of HPGL PS command is taken as
the size of image.
When this is not checked, image size is taken from minimum to
maximum of image.
Enable Pen Scale
If you check "Pen Scale", the pen width is also enlarged or reduced
if output size is enlarged or reduced.
If you do not check it, the pen width is same even if output size is
enlarged or reduced.
Cut and feed by SP/SP0:
When this is checked, multi-files are outputted since SP/SP0
command is recognized as a boundary of multi-drawing if it is
included in the file.
Enable LA Setting:
If you check "Enable LA Setting", line processing is fixed as below.
Line Ends: Round
Line Joins: Rounded Join
Enable MC Setting:
If you check "Enable MC Setting", MC0/MC1 is validated.
Enable RP Setting:
RP Command is validated, and Number of print setting on both FTP
and LPR is invalidated.
This setting is valid on the outputs from FTP and LPR but invalid on
the outputs from Print Client KM and Web Client.
42