Table of Contents
Advertisement
1.4 Basic operation
This Product does not have a power ON/OFF switch. Connect the supplied power
cord to this Ethernet Switch and connect the other end into an electric outlet.
This Ethernet Switch operates at AC 100 - 240 V (50/60 Hz).
1 or 2 power cords may be mounted, and if the AC power supply is normally being
supplied to the power ports, the POWER 1 LED, or the POWER 2 LED, or both of
the LEDs light up green, the STATUS LED lights up orange, and the hardware's
self-diagnostic is implemented.
On completion of self-diagnosis, STATUS LED light in green, and the Ethernet Switch
starts operation as a Ethernet Switch.
When this Ethernet Switch successfully communicates with a terminal connected to a
port, the Port LED lights up.
When the terminal is not operating normally, for example when power is not
supplied to the terminal, the Port LED does not light up.
*
For configuration and management method, please see the PDF version
Operating Instructions on Panasonic's website.
11
Advertisement
Table of Contents
