Table of Contents
Advertisement
Product Outline
1
1.4 Basic operation
This Product does not have a power ON/OFF switch. Connect the supplied power
cord to this Ethernet Switch and connect the other end into an electric outlet.
This Ethernet Switch operates at AC 100 - 240 V (50/60 Hz).
When power is supplied, all the LEDs are turned ON.
Then, POWER LED (Power) lights in green, STATUS LED lights up orange, and the
hardware's self-diagnostic is implemented.
On completion of self-diagnosis, STATUS LED light in green, and the Ethernet Switch
starts operation as a Ethernet Switch.
When this Ethernet Switch successfully communicates with a terminal connected to a
port, the Port LED lights up.
When the terminal is not operating normally, for example when power is not
supplied to the terminal, the Port LED does not light up.
*
For configuration and management method, please see the PDF version
Operating Instructions on Panasonic's website.
10
Advertisement
Table of Contents
