Basic Instructions For The Use Of This Product - Panasonic ZEQUO 6600RE Installation Manual

Basic Instructions for the Use of This Product

 For inspection and/or repair, consult the shop.
 Use commercial power supply from a wall socket, which is close and easily accessible to
this Ethernet Switch.
 Unplug the power cord when installing or moving this Ethernet Switch.
 Unplug the power cord when cleaning this Ethernet Switch.
 Use this Ethernet Switch within the specifications. Deviation could lead to malfunction.
 Do not touch the metal terminal of the RJ45 connector, the modular plug of connected
twisted pair cable, or the metal terminal of the SFP extension slot. Do not place charged
objects in the proximity of them. Static electricity could lead to equipment failure.
 Do not put the modular plug of the connected twisted pair cable on objects that can
carry static charge, such as carpet. Do not place it in the proximity. Static electricity could
lead to equipment failure.
 Do not put a strong shock, including dropping, to this Ethernet Switch. Deviation could
lead to equipment failure.
 Before connecting a console cable to the console port, discharge static electricity, for
example by touching metal appliance (do not discharge by touching this Ethernet Switch).
 Do not store and/or use this Ethernet Switch in the environment with the characteristics
listed below. (Store and/or use this Ethernet Switch in the environment in accordance
with the specification.)
- High humidity. Possible spilled liquid (water).
- Dusty. Possible static charge (such as carpet).
- Under direct sunlight.
- Possible condensation. High/low temperature exceeding the specifications
environment.
- Strong vibration and/or strong shock.
 Please use this Ethernet Switch in place where ambient temperature is from 0 to 45°C.
Failure to meet the above conditions may result in fire, electric shock, breakdown,
and/or malfunction. Please beware because such cases are out of guarantee.
Additionally, do not cover the bent hole of this Ethernet Switch.
Deviation could lead to high internal temperature, equipment failure and/or
malfunction.
 When stacking Ethernet Switches, leave a minimum of 20 mm space between them.
 When connecting the stacks, be sure to use firmware versions that are identical for all
of the devices.
Please note that operations are not guaranteed if the firmware versions are different.
 Select the appropriate cables and lay them.
Communications might be affected by how the cables are laid, and environmental noise.
1. Please note that Panasonic shall not bear any liability whatsoever for any damages
(this shall include, but is not limited to, lost earnings, lost opportunities, etc.)
which were generated in relation to damages caused by operations and usage,
or the inability to use this Ethernet Switch, whereby the customer does not follow
this Installation Guide.
2. The contents described in this document may be changed without prior notice.
3. For any question, please contact the retailer where you purchased the product.
6