HIKVISION DS-7600NXI-K1 Series User Manual page 64

Network Video Recorder User Manual
Manual
Add IP camera without physical connection via network cable.
4. Set other parameters, such as user name, password, and IP address.
Configure Advanced Camera Parameters
You can configure advanced camera parameters like camera IP address, camera password, etc.
Before You Start
● Ensure your network camera is on the same network segment with your video recorder.
● Ensure the network connection is valid and correct.
Steps
1. Go to Configuration → Camera → Camera.
2. Click .
3. Set camera parameters like IP address, camera password, etc.
4. Click Apply.
Configure Channel Type
You can disable a PoE channel to additionally increase a normal IP channel resource.
Go to Configuration → Camera → Camera → PoE Binding Configuration, and set the PoE channel
as your desire.
Figure 6-15 PoE Binding Configuration
52