Cancelling The Programme; Resuming The Programme When The Programme Status Is Rinse Hold; Unloading The Laundry; Switching Off The Appliance - Siemens WM14VPH9GB User Manual And Installation Instructions

Hide thumbs Also See for WM14VPH9GB:
Table of Contents

Advertisement

en Basic operation

Cancelling the programme

Once the programme has started, you
can cancel it at any time.
Notes
¡ Please read the safety information
→ Page 4 to ensure that you use the
appliance safely.
¡ If you cancel a programme with act-
ive oxygen, the door will remain
locked for up to 25 minutes until
there is no longer any active oxygen
in the drum.
the active oxygen is being removed.
The door is then unlocked.
Press Start / Reload .
1.
Open the door.
2.
The appliance door remains locked
for safety reasons if the temperature
and water levels are high.
– If the temperature is high, start the
Rinse programme.
– If the water level is high: Start the
Spin or Drain programme.
Remove the laundry.
3.
Resuming the programme
when the programme status
is Rinse Hold
Set the Spin or Drain programme.
1.
Press Start / Reload .
2.

Unloading the laundry

Note: Please read the safety informa-
tion → Page 4 to ensure that you use
the appliance safely.
Open the door.
1.
Remove the laundry.
2.
36
and
flash while

Switching off the appliance

Press
.
1.
Turn off the tap.
2.
Wipe the rubber gasket dry and re-
3.
move any foreign objects.
Leave the door and detergent
4.
drawer open so that residual water
can evaporate.

Advertisement

Table of Contents
loading

Table of Contents