Table of Contents
Advertisement
Errors
Foam build-up symbol
flashes.
All other error codes.
Malfunctions
Errors
The appliance is not working.
The programme does not
start.
Cause
Detergent dosage is too high.
Door is not closed.
Malfunction
Cause
The mains plug of the power
cord is not plugged in.
The circuit breaker is faulty.
There has been a power cut.
You have not pressed Start /
Reload .
Door is not closed.
Childproof lock is activated.
- Ready In + is activated.
Laundry is caught in the door.
Troubleshooting en
Troubleshooting
Immediate measure: Mix one table-
▶
spoon of fabric softener with 0.5
litres of water and pour the mixture
into the left-hand compartment (not
for outdoor clothing, sportswear or
items stuffed with down).
Reduce the amount of detergent for
▶
the next washing cycle with the same
load.
Close the door.
1.
Press Start / Reload to start the pro-
2.
gramme.
Call the after-sales service.
▶
→ "Customer Service", Page 61
Troubleshooting
Connect the appliance to the power
▶
supply.
Check the circuit breaker in the fuse
▶
box.
Check whether the lighting in your kit-
▶
chen or other appliances are working.
Press Start / Reload .
▶
Close the door.
1.
Press Start / Reload to start the pro-
2.
gramme.
→ "Deactivating the childproof lock",
▶
Page 37
Check whether - Ready In + is activ-
▶
ated.
→ "Buttons", Page 26
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press Start / Reload to start the pro-
4.
gramme.
53
Advertisement
Table of Contents
