Windows Printing Via Netbeui - Kyocera KM-1530 Quick Configuration Manual

File and Printer Sharing service is installed. Check under
,
8. Follow the prompts to complete the Add Printer wizard.
9. If you have selected the printer for sharing and would like other Windows versions to automatically
receive the printer driver when connecting to the printer share, use the following procedure:
9.1. In the Printers dialog, right click on the printer just created with the Add Printer wizard and select
.
9.2. On the Sharing tab, click
Windows 2000 offers printing via the Internet Printing Protocol (IPP). IPP is most often used for printing
across the Internet but may be used for intranet printing as well.
Configure the IB-2x IP Address
See the IP Address Configuration section later in this guide.
Install the Printer Driver and Configure the Port
1. Run the Windows Add Printer wizard (
2. Select
3. On the Locate your Printer dialog, select
and enter the URL using syntax as shown in the example: http://212.74.53.19/ipp
4. Follow the prompts to complete the Add Printer wizard.
Peer to Peer printing is available using the NetBEUI protocol. With this method, the printers are
conveniently located in Network Neighborhood.
1. The Windows machine must already be configured to use NetBEUI.
In Windows 95/98/Me, check under
In Windows NT 4.0, check under
In Windows 2000 check under
2. Use the Quick Setup wizard on the CD-ROM (Kyocera Mita Network Library or Kyocera Mita
Software Library) to modify the default Workgroup (KY-NetPrinters) and Printer Name (KYxxxxxx)
to the desired names.
3. In Network Neighborhood, select
workgroup and select the desired printer.
4. Right click on the
Follow the prompts to complete the Add Printer wizard.
5. Printer sharing is not commonly used with NetBEUI printing, however, some admins may want to
utilize sharing on NT 4.0 or 2000 to take advantage of their automatic driver download capability.
For steps on setting up printer sharing, see the Windows NT 4.0 LPR or Windows 2000 Standard
TCP/IP Printing instructions.
.
,
,
, .
icon and select
, .)
and select the drivers to associate with this printer.
, ,
, ,
,
,
, then open the KY-NetPrinters (or the renamed)
. This launches the Windows Add Printer wizard.
10
, ,
, ).
, .
, , .
,