Kyocera KM-1530 Quick Configuration Manual page 8

Install the Printer Driver and Configure the Port
1. Insert the CD-ROM included with the printer (Kyocera Mita Software Library or Kyocera Mita
Digital Library), then select the printer driver installation option from the main menu.
2. On the Printer Connection dialog, select
3. On the Select a Printer Port dialog, click on the
4. In the
5. In the
LPR1, and click on
6. If the printer is to be shared, then on the appropriate wizard dialog select
desired share name. Select any other Windows versions which you would like to automatically
receive the driver when connecting to this share.
The IB-21E/22 offers a new function for e-mail printing. With this function, a print job can be e-mailed to a
remote printer, e.g. over the Internet, using the standard print function in any Windows application.
An IB-21E/22 configured for e-mail printing connects to an e-mail server via POP3 and retrieves e-
mailed print jobs. For information on the setup procedure, see the POP3 and email setup procedure in
the operating instructions (HTML) on the included CD-ROM (Kyocera Mita Network Library or Kyocera
Mita Software Library).
Once the IB-21E/22 is configured to retrieve e-mail, KPrint is used to create a port in Windows which
directs print jobs to the printer via e-mail. After creation with KPrint, the port may be selected when
adding a new printer with the Windows Add Printer wizard ("Local printer" is selected for ports created
by KPrint).
A common implementation is to create a shared printer on a Windows server and configure it to use the
e-mail port created by KPrint to e-mail print jobs to a remote office printer. Users can then easily connect
to the shared printer using only the Windows Add Printer wizard and send print jobs to the remote office.
This offers an attractive alternative to faxing.
Configure the IB-2x IP Address
See the IP Address Configuration section later in this guide.
Install the Printer Driver and Configure the Port
1. Run the Windows Add Printer wizard (
2. Select
3. Select
will launch the Add Standard TCP/IP Printer Port wizard.
4. In the
5. In the
6. After completion of the Add Standard TCP/IP Printer Port wizard, the Add Printer wizard will
continue. Select the appropriate printer model.
7. After assigning the printer a name, the Printer Sharing dialog is displayed. If the printer is to be
shared, select
.
and uncheck
and choose
field, enter the IB-2x IP address.
field, enter the desired port name or accept the default.
and enter the share name. (Printer Sharing will only be available if the
.
button.
field, enter the IB-2x IP address.
field, enter any desired port name, e.g.
, , ,
from the drop down
9
and enter the
).
.
list. This