Ib-2X Setup Utility Installation; Setting Kpdl Emulation And Appletalk Name And Zone; Installing Ppds And Configuring The Printer - Kyocera KM-1530 Quick Configuration Manual

A Macintosh Setup Utility is included on the CD-ROM (Kyocera Mita Network Library or Kyocera Mita
Software Library) which allows the user to perform management tasks such as remotely configure KPDL
emulation, set the AppleTalk name and zone, and set TCP/IP parameters.
The AppleTalk protocol must be active on your Macintosh computer to support printing to the IB-2x.
l
1. Load the CD-ROM (Kyocera Mita Network Library or Kyocera Mita Software Library) and double
click the
2. Open the folder.
3. Double click the IB-2x
4. Select the desired language and click
5. Confirm the destination folder or browse to the desired folder. Click
6. Click to exit the installer.
1. Open the
2. The utility will search for all available IB-2x devices on the AppleTalk network (in the current zone)
and display them in the
AppleTalk zone or to search for printers via TCP/IP. See the on-line IB-2x User's Manual for
additional information on configuring searches.
3. Double click on the desired printer in the Printer List to open the device configuration window.
4. Click on the
5. Click on the
Enter the desired
indicates the printer will appear in the default zone.
6. Click SET to send the changes to the printer.
7. Setting the AppleTalk name or zone require a reset before they will take effect. Close the device
configuration window and select
Macintosh support for Kyocera printers and copiers is provided by the LaserWriter driver included with
the Macintosh Operating System and by installation of model specific PPD files. These instructions apply
to Mac OS 8 and 9 only.
1. PPD files are installed from the CD-ROM (Kyocera Mita Software Library or Kyocera Mita Digital
Library) provided with the printer. Insert the CD-ROM, open the appropriate language folder, and
double click on the Installer program.
2. Once PPD installation is complete, select
3. Select the LaserWriter 8 driver, the AppleTalk Zone (if any) and the IB-2x printer.
4. Click on . The driver will automatically select the appropriate PPD file and will display a
dialog allowing selection of the installed printer options.
5. Select installed options as necessary and confirm that the list of installed options matches the printer
configuration. Click on
printing configuration is now complete.
icon on the desktop.
.
.
folder and double click
. The Setup Utility may be configured to search in a different
icon. Choose the appropriate KPDL option and click
icon. Enter the desired
to indicate the zone that the printer will appear in. An asterisk (*)
from the Setup menu.
. A desktop printer for this model will be built on the desktop. Macintosh
to launch the utility.
as it will be displayed in the Chooser.
from the Apple menu to open the Chooser.
12
to begin copying the files.
.