Kyocera KM-1530 Quick Configuration Manual page 3

Thank you for choosing the high quality Kyocera Mita network printing products. We are sure you will
appreciate the exceptional performance and low cost of ownership that are the hallmarks of Kyocera
Mita products.
This product is an internal network interface card for Kyocera Mita printers and digital copiers. It can be
easily installed without removing the main board on the printer. This product enables Kyocera Mita
printers and digital copiers to communicate over an Ethernet network with many different network
operating systems, including Windows, NetWare, Macintosh, and UNIX.
This Quick Configuration Guide provides concise software configuration instructions allowing an
experienced system administrator to get the IB-2x up and running quickly. If you have any questions,
see the operating instructions on the included CD-ROM (Kyocera Mita Network Library or Kyocera
Mita Software Library).
Inserting the KMNL CD-ROM causes the Main Menu to be displayed. If the Main Menu is not shown
automatically, run the Setup.exe file in the root directory of the CD-ROM. This Quick Configuration
Guide refers to the following utilities in the Configuration section of the CD-ROM:
A wizard interface for configuring the necessary settings to get the IB-2x up and
printing quickly.
It enables advanced settings and network interface card monitoring.
Installs a client port monitor to enable Windows TCP/IP printing to any IB-2x connected
Kyocera Mita printer/copier. With the IB-20/21, KPrint supports LPR and IPP printing in Windows 95/98/
Me. With the IB-21E/22, KPrint additionally supports printing via E-mail in Windows 95/98/Me/NT4/
2000.
KYOCERA , KYOCERA MITA are registered trademarks of KYOCERA CORPORATION. NetWare is a registered trademark of Novell,
Incorporated. Windows is a registered trademark of Microsoft Corporation. Macintosh is a registered trademark of Apple Computer,
Incorporated. PostScript and Acrobat are registered trademarks of Adobe Systems, Incorporated. All other products referenced are
trademarks or registered trademarks of their respective companies.
This equipment complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
4