Installation Precautions - Bass Habit Play PP55.4 G2 User Manual

INSTRUCTIONS
INSTALLATION EXPERIENCE
Installation of Bass Habit amplifiers may require experience with a variety of mechanical procedures including
cable wiring, drilling, etc. This manual only provides general installation and operation instructions. If you have any
reservations about your installation skills, please contact your local authorized Bass Habit dealer for help.
CHOOSING AMPLIFIER MOUNTING LOCATIONS
Choose a mounting location in an area where the amplifier will not be damaged, and where the amplifier is not
covered up. Mount the amplifier so that it remains dry - never mount an amplifier outside the vehicle or in the
engine compartment. Amplifier cooling is essential for proper amplifier operation. If the amplifier is to be installed
in an enclosed space, make sure there is sufficient air circulation for the amplifier to cool itself. When mounting the
amplifier under a seat, ensure that it is clear of all moving parts and does not affect the seat functionality. Make
sure that the amplifier is mounted securely using nuts and bolts or the supplied mounting screws.

INSTALLATION PRECAUTIONS

NOTE! Proceed only if you are a qualified installer, otherwise let your dealer do it.
• Always wear protective eyewear when using tools.
• Turn off all stereo and other electrical devices before you begin.
• Disconnect the (-) negative lead from your vehicle's battery.
• Keep the amplifier in the package until final installation, and always rest it upwards.
• Never use force when installing a amplifier.
• Locate all fuel lines, brake lines, oil lines and electrical cables when planning your installation.
• Check clearances on both sides of a planned mounting surface before drilling any holes or fixing screws.
• When routing cables, keep input-signal cables away from power cables and speaker wires.
• When making connections, make certain all cables are secure and properly insulated.
- 5 -