Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Bass Habit Play PP70.2 G2
Summary of Contents for Bass Habit Play PP70.2 G2
- Page 1 PP70.2 G2 Play Power 2-channel Amplifier User Manual...
- Page 2 THANK YOU FOR PURCHASING BASS HABIT Thank you for purchasing this Play Power Class A/B amplifier from Bass Habit. Please read this manual in order to fully understand how to get the best result from this product and ensure that the advices on how to look after the product and the safety precautions are followed.
-
Page 3: Safety And Warranty
Please use common sense when listening to your audio system and practice safe sound. Keep the volume at a level so you can still hear outside noise. Failure to do this may result in an accident. Bass Habit recommends caution when listening at a high volume. -
Page 4: Step 1) Power Connections
STEP 1) POWER CONNECTIONS The Bass Habit Play Power amplifiers are capable of delivering extremely high power levels and require a heavy- duty and reliable connection to the vehicle’s electrical system. To get the very best performance out of your Bass Habit Play Power amplifier, carefully follow the instructions below:... -
Page 5: Step 2) Speaker Connections
STEP 1) POWER CONNECTIONS POWER CONNECTIONS STEP 2) SPEAKER CONNECTIONS Speaker output connections should be made using a minimum of 16 awg / 1.25mm² wire. The terminal accepts up to 8 awg/10mm². Minimum total allowed impedance load is 2 Ohm stereo / 4 Ohm Bridge mode. 2-CHANNEL STEREO SPEAKER SYSTEM 2-8 Ohm 2-8 Ohm... -
Page 6: Step 3) Signal Connections
STEP 2) SPEAKER CONNECTIONS 1-CHANNEL BRIDGE MODE min. 4 Ohm STEP 3) SIGNAL CONNECTIONS Use high quality RCA jacks cable to make sure that you get the full audio experience. SIGNAL CABLE CONNECTIONS - 7 -... -
Page 7: Control Panel
CONTROL PANEL Bass Habit Play Power 2-channels amplifiers can be used for both speakers and subwoofers. While listening to music, adjust the gain/crossover/subsonic/bass boost for the least per- ceived distortion from the speakers, allowing them to reproduce as much bass as possible. - Page 8 SIDE PANEL PP70.2 G2 INPUT RCA Rear input GAIN Gain control, input signal adjustment 0.2V-6V BASS BOOST 6dB/0dB/120dB (45Hz) Low Pass Filter 50-500Hz (12db/Oct) LPF/FLAT/HPF Filter mode settings High Pass Filter 50-3000Hz (12dB/Oct) POWER Power indicator (Green) PROTECT Protect indicator (Red) - 9 -...
-
Page 9: Specifications
SPECIFICATIONS PP70.2 G2 Class AB amplifier Component 2 channels Number of channels 2x100W RMS * Power output @ 2 ohm 2x70W RMS * Power output @ 4 ohm 1x180W RMS * Bridged power @ 4 ohm 400W MAX Power output MAX >90dB 20Hz - 20KHz Frequency response... -
Page 10: Troubleshooting
TROUBLESHOOTING Symptom Check / Control No sound • Check and measure voltage at +12V and REM terminals / No active POWER LED (allowed working range is 10-16V DC). • Check and measure ground connections. • Check external fuse. • Check input signal and cables from source unit. •... - Page 11 The crossed-out wheelie bin symbol means that the product, literature and packaging included must be taken to separate collection at the end of their working life. Do not dispose of these products as unsorted municipal waste: dispose of them at a recycling point. For info on your nearest recycling point, check with your local waste authority. Products marked with the RoHS symbol complies with the relevant provisions of the RoHS Directive for the European Union.