Step 1) Power Connections - Bass Habit Play PP55.4 G2 User Manual

STEP 1) POWER CONNECTIONS

The Bass Habit Play Power amplifiers are capable of delivering extremely high power levels and require a heavy-
duty and reliable connection to the vehicle's electrical system. To get the very best performance out of your Bass
Habit Play Power amplifier, carefully follow the instructions below:
GROUND CONNECTION (GND):
Connect the amplifiers Ground (GND) terminal to a solid point on the vehicles metal chassis, as close to the
amplifiers as possible. Scrape away any paint from this location; use a star-type lock washer to secure the connec-
tion. Minimal ground wire recommended size:
• PP55.4 G2: 8 awg/ 10mm²
• PP65.4 G2: 8 awg/ 10mm²
POWER CONNECTION (+12V):
Connect a wire directly to the vehicles positive battery terminal, and install an appropriate fuse and holder within
30cm/12" from the battery terminal. Keep the fuse uninstalled at the time for routing and connecting the power
wire. Be sure to use grommets whenever routing wires through the firewall or other metal parts. When routing/
connecting is done, installation of the fuse into fuse holder can be finalised.
Minimal power wire recommended size:
• PP55.4 G2: 8 awg/ 10mm²
• PP65.4 G2: 8 awg/ 10mm²
REMOTE CONNECTION (REM):
Connect the amplifiers Remote (REM) terminal to the source unit Remote turn on lead using a minimum of
0.75mm²/18 gauge wire. If your source unit does not have a turn on connection, connect the amplifier (REM)
terminal through a power switch button which can provide a +12V signal.
POWER CONNECTIONS
- 6 -