Advertisement
INSTALLATION
Turn off the audio system and other electronic devices before you start. Disconnect the
negative (-) lead from your vehicle's battery.
Choose a mounting location in an area where the amplifier will not be damaged, and where the
amplifier is not covered up.
Mount the amplifier so that it remains dry - never mount an amplifier outside the vehicle or in
the engine compartment.
Amplifier cooling is essential for proper amplifier operation. If the amplifier is to be installed in
an enclosed space, make sure there is sufficient air circulation for the amplifier to cool itself.
When mounting the amplifier under a seat, ensure that it is clear of all moving parts and does
not affect the seat functionality.
Check clearances on both sides of a planned mounting surface before drilling any holes or
fixing any screws. Remember that the screws can extend behind the surface.
At the installation area, locate and take note of all fuel lines, hydraulic brake lines, vacuum lines
and electrical wiring. Use extreme caution when cutting or drilling in and around these areas.
Before drilling or cutting any holes, use a utility knife to remove unwanted fabric or vinyl to
keep material from snagging in a drill bit.
When routing cables, keep input-signal cables away from power cables and speaker wires.
When making connections, make certain ale cables are secure and properly insulated.
Make sure that the amplifier is mounted securely using nuts and bolts or the supplied
mounting screws.
Advertisement
