Global Midi Settings; Multitrack Mode (Advanced Users Only); Master Channels - Rodgers Trillium T807 Owner's Manual

Table of Contents

Global MIDI Settings

In addition to the various MIDI parameters that can be stored relative to individual MIDI

couplers, there are a number of global MIDI settings. Changes made to these settings affect the

MIDI functionality of the entire organ.

Note: Press and hold SET and momentarily press (0) to send an "all notes off" message from the

T807 Sequencer Out and MIDI Out ports.

This mode, selectable in the MIDI settings screens, disables stop maps and keying/volume

information on the Master Channels.

When Multitrack Mode is turned on:

1. MIDI information on all Master Channels is disabled.

2. Stop/piston information is no longer sent.

3. MIDI Update is turned off.

4. MIDI couplers do not send program changes when there is a MIDI Start command.

Display screens that cannot be changed are not available while Multitrack Mode is enabled.

(Master Channel Status and Stop Message Transmission, for example). This mode is normally

off when the instrument is turned on and returns again to the off mode when the instrument is

turned off.

The Rodgers T807 reserves several MIDI channels for recording and playback of the organ using

a MIDI sequencer. One channel is reserved for each division as shown:

Great Master Channel

Swell Master Channel

Pedal Master Channel

The organ sends and receives MIDI information on these channels unless they are disabled. It

may be necessary to disable one or more Master Channels when using the organ console as a

MIDI keyboard controller in multi-track or multi-layer sequencing, to avoid duplicating note data

on multiple tracks.

Enabling or Disabling a MIDI Master Channel

1. Press and hold the SET piston, and turn the Select knob clockwise (right) to the MIDI

Settings category.

2. Turn the Select knob until Master Channel shows in the display.

Notes and Expression

Table of Contents