How Do I Get Started; Unpacking And Contents; Optional Accessories - Kramer VM-2N User Manual

HOW DO I GET STARTED?

3.
The fastest way to get started is to take your time and do everything right the first time. Taking
15 minutes to read the manual may save you a few hours later. You don't even have to read the
whole manual. At the beginning of each section, you'll find an overview of the section. So if the
section doesn't apply to you, you don't have to spend your time reading it.

UNPACKING AND CONTENTS

4.
The items contained in your Kramer VM amplifier package are listed below. Please save the
original box and packaging materials for possible future transportation and shipment of the
amplifier.
Desktop size amplifier
AC power cable (where applicable)
User's Manual
Rubber feet
Kramer concise product catalog
For additional information regarding optional cables and additional accessories, contact your
Kramer dealer.

Optional Accessories

4.1
The following Kramer accessories can enhance implementation of your amplifier.
Rack Adapter - Used to adapt non-standard size machines to a standard 1U rack. One or
more machines may be installed on each adapter.
BNC "Y" Connector - Used for looping purposes and splits the incoming signal to enable
connection of an additional machine.
Termination Plug - Used to terminate the line to 75ohm for proper matching.
SP-40 - (video/audio Processor) Serially connected between the video/audio source and
the VM amplifier for video and audio processing. The machine is a high quality processor
used for video control and correction in duplication and production studios, camera control,
luminance and white balance correction. The SP-40 is capable of Composite to Y/C
conversion and bi-directional transcoding. The machine allows video gain control down to full
fade, definition control, contrast control, color saturation control, black level control, audio
mix control for mixing between the selected source and an audio AUX source and a screen
splitter control for "before-after" comparison. The unique limiter switch in the SP-40 allows
true signal limiting and special effects.
SP-11 - (video/audio Processor) can be serially connected between the video/audio source
and the VM amplifier for video and audio control/correction. The machine provides camera
control and luminance/white balance correction. The SP-11 is also capable of performing
composite to Y/C conversion and bi-directional transcoding. The machine allows full control
over the video signal: video gain down to full fade, log or linear definition control, log or
linear contrast control, color saturation control, black level control, red, green and blue
controls and a screen splitter control for "before-after" comparison. The Input switch control
is "audio-follow-video".
KRAMER ELECTRONICS LTD.
4