Installation Instructions - PRITY GT Instructions For Installation And Operation Manual

EN
II. INSTALLATION INSTRUCTIONS
The cooker is placed on a stable horizontal fireproof floor. To protect the floor, a
stable and fireproof pad can be used, which protrudes at least 50 cm in front and 30 cm
from the side.
In the radiating area of the stove, at a distance of 40 cm around it, there shall be no
flammable or easily flammable objects and partitions damaging by the radiated heat.
Before connecting the cooker to the chimney, consult a specialist, who shall give
you a written guarantee for its functional safety.
Attention: the shared responsibility towards third parties for the serviceability and
the safety of the chimney can be joint and unlimited.
The connecting elements (rosette and stove-pipes) must be fixed tightly and firmly,
so as they may not enter the passage section of the chimney. The pipes must be the
same size as connecting pipe of the cooker. It is not allowed to change the cross-section
of the flue, different from the manufacturer!
It is recommended that the cooker works with a separate chimney. If other heating
appliances are connected in the same chimney, it must be pre-designed for that.
Fresh air must get in the cooker at least 4m3/h for each kilowatt from its heat
output. When necessary, inflow from adjacent premises or outside air must be
provided.
The combustion process of the cooker must not feel shortage of air on the action of
gravity or forced aspirations, because it is a prerequisite for incomplete combustion or
return of exhaust gases to the premises.
EXAMPLE DIAGRAMS OF OPERATION OF AN APPLIANCE
WITH A WATER HEAT EXCHANGER IN AN OPEN SYSTEM
1. Open water heating system
with an open expansion tank
and a pump.
2. An open gravity self-venting
water heating system with an
open expansion vessel,
without a pump.
18 |
Diagram II-1