Table of Contents
Advertisement
INSTALLATION
2.4.6
Outputs
The following pins are present on the spring clamp connector of the decoder:
The meaning of the outputs OUT1, OUT2 and OUT3 can be defined by the user (No
Read, Right or Wrong or a combination thereof). Refer to WinHost Help On Line.
By default, OUT1 is associated with the No Read event, which activates when the
code signalled by the External Trigger is not decoded.
OUT2 is associated with the Right event, which activates when the code is decoded
correctly.
OUT3 is associated to the Wrong event, which activates when a code is successfully
decoded but does not match the Verifier code. Therefore it is meaningful only if the
Verifier mode is enabled.
DP1200
These outputs are all level or pulse configurable.
Pin
Name
12
OUT1+
13
OUT1-
14
OUT2+
15
OUT2-
16
OUT3+
17
OUT3-
12/14/16
13/15/17
Figure 22 - Open collector output connection
Function
Output 1 +
Output 1 -
Output 2 +
Output 2 -
Output 3 +
Output 3 -
+
-
USER INTERFACE
Vext
40 Vdc max
2
23
Advertisement
Table of Contents
