Configure Recording Parameter - HIKVISION HiLook NVR 104MH-D/4P User Manual

Table of Contents

Advertisement

6. Click OK to save the advanced settings.
7. Click Apply.

6.5.2 Configure Recording Parameter

Steps
1. Go to Configuration → Record → Parameter to configure camera main stream and sub-stream
parameters.
2. Configure recording parameters.
Main Stream
Main stream refers to the primary stream that affects data recorded to the hard disk drive
and will directly determine your video quality and image size. Comparing with the sub-
stream, the main stream provides a higher quality video with higher resolution and frame
rate.
Sub-Stream
Sub-stream is a second codec that runs alongside the mainstream. It allows you to reduce the
outgoing internet bandwidth without sacrificing your direct recording quality. Sub-stream is
often exclusively used by smartphone applications to view live video. Users with limited
internet speeds may benefit most from this setting.
Frame Rate
Frame rate refers to how many frames are captured each second. A higher frame rate is
advantageous when there is movement in the video stream, as it maintains image quality
throughout.
Resolution
Image resolution is a measure of how much detail a digital image can hold: the greater the
resolution, the greater the level of detail. Resolution can be specified as the number of pixel-
Network Video Recorder User Manual
Figure 6-28 Advanced Parameters
72

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents