Ports (More Settings) - HIKVISION HiLook NVR 104MH-D/4P User Manual

2. Install the CA certificate in CA Certificate.
3. Click Create in Client Certificate, and follow the pop-up to create the certificate.
4. Click Download to download the certificate file to a desired location.
5. Upload the downloaded certificate file to the server, and the server will return the certificate
key.
6. Open the certificate as a text file, and modify it by the certificate key as the server returned.
7. Install the modified certificate in Client Certificate.
8. Optional: Click Test to test if the connection is valid.
9. Click Save.

6.2.6 Ports (More Settings)

Set different port types to enable relevant functions as your desire.
Go to Configuration → Network → General → More Settings.
Alarm Host IP/Port
The device will send the alarm event or exception message to the alarm host when an alarm is
triggered. The remote alarm host must have the client management system (CMS) software
installed.
Alarm Host IP refers to the IP address of the remote PC on which the CMS software (e.g., iVMS-
4200) is installed, and the Alarm Host Port (7200 by default) must be the same as the alarm
monitoring port configured in the software.
Server Port
Network Video Recorder User Manual
Figure 6-9 Two-Way Authentication
46