Engine Compartment - Skyjack SJ1044 TH Manual

Section 1 – Scheduled Maintenance
Radiator
Fill Cap
Fan Belts
Fuel Filter
Fuel/Water
Separator
Hydraulic Oil - A, D
▪
Be sure that the boom is in the lowered and
▪
stowed position, and then visually inspect the
sight gauge located at the rear of the hydraulic
oil tank.
Add clean hydraulic oil as required. Refer to
▪
section 5.5-2 for hydraulic oil change.

1.5-7 Engine Compartment

Ensure compartment cover is secure and in proper
working order.
WARNING
Beware of hot engine components.
Engine Oil Level on dipstick
▪
Maintaining the engine components is essential
▪
to good performance and service life of the
telehandler.
Oil level should be between the "L " low and "H"
▪
high marks. Add oil as needed. Refer to section
5.4-4 for oil replacement procedure.
230790ABA
20
Engine Engine
Oil Filter Oil Dipstick
Engine Coolant
▪
Pressurized fluid present in radiator. Never open
radiator cap when hot. Always open fill cap slowly.
▪
▪
Refer to section 5.5-5 for engine coolant change
procedure.
Belts -
▪
▪
- A, C
Hydraulic Pump -
▪
▪
▪
▪
Fuel/Water Separator "
▪
Ensure there are no loose or missing parts and
there is no visible damage.
▪
SJ1044 TH, SJ1044 THS, SJ1056 TH, SJ1056 THS, SJ1256 THS
Scheduled Maintenance Inspections
- A
WARNING
Check coolant level on radiator.
Add coolant as required.
A
Ensure belts are in good working condition
and have correct tension. Replace if belts are
cracked, frayed, or have chunks of material
missing. Refer to service manual for proper
replacement procedure.
A
Ensure there are no loose or missing parts and
there is no visible damage.
Ensure all bolts are properly tightened.
Ensure all fittings and hoses are properly
tightened and there is no evidence of hydraulic
oil leakage.
Ensure all fittings and hoses are properly
tightened and there is no evidence of fuel leaks.
Hydraulic
Oil Pump
Transmission
Oil Dipstick
" - C, D