Leds And Buttons - Inspur NF5468A5 Manual

5.2.2 LEDs and Buttons

Figure 5-6 Rear Panel LEDs and Buttons
Item Feature
1 PSU LED × 4
Connection Status LED of
3 BMC Management Network
Port
5 UID Button and LED
1. LED and Button Description
Table 5-3 Rear Panel LED and Button Description
Icon LED Description
The UID LED is used to identify the device to
be operated


UID Button and

LED
The UID LED turns on when activated by the UID button or
via ISBMC remotely.
Long press the UID button for over 6 seconds to reset the
BMC.
Item Feature
Data Transmit Rate LED of
2 BMC Management Network
Port
OCP 3.0 Card Hot-Plug Button
4
and LED
Off = System unit not identified
Solid blue = System unit identified
Flashing blue = System unit being
operated remotely
12