Connecting The Microphone - Silvercrest SPLB 44 A1 Quick Start Manual

NOTICE
If playback sounds distorted, reduce the volume on the Bluetooth
►
playback device.
Depending on the Bluetooth
►
operating system, it is possible that not all functions will be supported.
► In an environment with high-frequency interference, you may experience
noise interference during music playback in Bluetooth
as the interference no longer exists, music playback should automatically
continue in Bluetooth

Connecting the microphone

You can connect up to two microphones simultaneously. One microphone is
supplied with the product. You can purchase a second suitable microphone from
a specialist dealer. The microphones function in all the operating modes. The
volume of the microphone can be adjusted independently of the music playback
volume. You can give a speech, with accompanying music playback if required,
or you can use the microphones to sing karaoke, for example.
♦ Set the main switch
♦ Connect the 6.3 mm jack plug
6.3 mm jack sockets
♦ If required, connect a second microphone to the free 6.3 mm jack socket
♦ In each case, slide the On/Off switch
a microphone on.
♦ Adjust the volume for the microphone using the
♦ Press the
on the display
♦ Press the
goes out on the display
NOTICE
► The echo function does not influence music playback, but only applies
during microphone use.
♦ Press the
♦ If required, adjust the music playback volume using the
or mute the sound.
♦ In each case, slide the On/Off switch
a microphone off.
SPLB 44 A1
®
mode without any further problems.
to the position to switch the device on.
/
or .
button to activate the echo function.
.
button again to deactivate the echo function.
.
button until the required operating mode is displayed.
®
playback device being used and the
on the microphone
.
to position
to position
®
®
mode. As soon
to one of the two
to switch
dial .
appears
dial
to switch
GB │ IE │ 41 ■