Check The Alarm Status; Deactivate The Alarm; Connecting The Product To A Bluetooth Communication Device - Silvercrest SBL 3 C3 Operation And Safety Notes

Check the alarm status

When alarm is in on mode:
In clock mode, briefly press
ON", and then the preset alarm time.
When alarm is in off mode:
In clock mode, briefly press
OFF" .

Deactivate the alarm

Alarm rang on the preset alarm time and time display flash. To
switch off the alarm, press any button while the alarm is ringing.
Connecting the product to a Bluetooth
communication device
To get into bluetooth mode, press
until indicator
acoustic signal sounds. This indicates the product is now in
pairing mode, which remains active for approx. 15 minutes.
The product will switch off if not detecting a Bluetooth
connection , then "OFF" display and an acoustic signal
sounds.
button
button
display. indicator
7
. Then display "A
8
. Then display "A
8
button repeatedly
11
flash and an
7
®
®
device
GB/IE/NI 21