Safety; Risk Of Electrocution - Silvercrest SPLB 44 A1 Quick Start Manual

Safety

This section contains important safety instructions for handling the device.
This device complies with statutory safety regulations. Improper use may
result in personal injury and property damage.

Risk of electrocution

DANGER
Risk of fatal injury from electrocution!
Contact with live cables or components can result in a fatal injury!
Comply with the following safety information in order to avoid hazards from
electrical current:
► Do not use the device if the mains plug or the mains cable is damaged.
► When disconnecting the device from the mains supply, always pull on the
plug and never on the cable.
► Never touch the mains plug or the device with wet hands.
► Never open the device housing. Touching live connections or making
modifications to the electrical or mechanical assembly can lead to a risk
of electrocution and fire.
► Do not expose the device to any large temperature fluctuations.
Condensing moisture may lead to a risk of short-circuiting. If you move the
device from a cold to a warm environment, allow the device to acclimatise
before using it. This can take up to two hours.
► Do not insert any objects into the ventilation slots or other openings on the
device.
► The device consumes power in standby mode. The main switch
for this device does not completely disconnect it from the power supply.
To completely disconnect the device from the mains power, the power plug
must be removed from the mains power socket. The device must be posi-
tioned so that you have unrestricted access to the mains socket at all times
and can pull out the plug immediately in an emergency.
■ 28 │ GB │ IE SPLB 44 A1