Handling And Use; System Requirements; Connecting The Loudspeaker; Switching On/Off And Adjusting The Volume - Silvercrest SLB 1.2 C2 Operating Instructions Manual

Handling and use

This section provides you with important information on handling and
using the device .

System requirements

▯ Computer with sound card and USB connection
or
▯ audio device with audio output (3 .5 mm jack plug) and USB
connection (alternatively with external USB power supply) .

Connecting the loudspeaker

♦ Ensure that the rotary switch
♦ Plug the 3 .5 mm jack plug
socket of your audio device (e .g . notebook, MP3 player) .
The audio signals are transmitted via this connection .
♦ Plug the USB plug
(alternatively into the USB socket of an external USB power
supply) . The mains adapter should have the following speci-
fications: 5 V
loudspeaker
NOTE
► The loudspeakers

Switching on/off and adjusting the volume

♦ Turn the rotary switch
order to switch the loudspeakers
♦ Turn the rotary switch
increase the volume .
♦ Turn the rotary switch
♦ Turn the rotary switch
(OFF position) in order to switch the loudspeakers

Switching the light on and off

♦ Turn the LIGHT switch
switch the loudspeaker
♦ Turn the LIGHT switch
switch the loudspeaker
SLB 1.2 C2
8
into a USB socket of your audio device
9
, min . 500 mA . The power supply for the
is provided via this connection .
6
do not work without a USB connection!
6
clockwise until a click is heard in
4
further in a clockwise direction to
4
anticlockwise to decrease the volume .
4
anticlockwise until a click is heard
4
to the "ON" position in order to
light on .
6
to the "OFF" position in order to
light off .
6
is in the "OFF" position .
4
into the line out or headphone
on .
6
off .
6
GB │ IE │ 7 ■