Connecting Via The Aux-In Jack; Switching Between Aux-In And Bluetooth ® Connections - Silvercrest SBL TW10 A1 Operation And Safety Notes

˜ Connecting via the AUX-in jack
NOTE: Music playback via the AUX-in jack 1 has a higher priority over
a Bluetooth connection .
®
Once the AUX cable 13 is plugged into the AUX-in jack 1 , the
Bluetooth wireless connection will be disconnected . Music playback is
®
now switched to AUX-in only and the LED 5 lights up green .
1
If the product is off, press and hold the
5 lights up green and a signal tone sequence sounds .
Switch the playback device on and start playback .
Adjust the volume on the playback device to the highest possible volume
then adjust the volume on the product using the
˜ Switching between AUX-in and Bluetooth
connections
To resume music playback via Bluetooth
cable 13 from the AUX-in jack 1 . The product will then search for the
previously paired playback device (if any) and re-establish the Bluetooth
connection automatically .
button 8 until the signal LED
9
and
connection unplug the AUX
®
1
13
7
buttons .
®
®
US-EN 17