Hidden Touch Controls Replacement - Dimplex PLF3614-XS Service Manual

Hidden Touch Controls Replacement

Tools Required: Phillips Head Screwdriver
1. Follow the instructions for Preparing the Firebox for Service on page 6.
2. Remove the 4 screws that hold the electronics cover panel. (Figure 9, page 9)
3. Remove the screws that secure the L-channel (number of screws will vary by model). (Figure 11)
4. Using the semi-circle grooves in the C-channel as guides for the screwdriver, remove the screws that secure the
C-channel (number of screws will vary by model). (Figure 12)
5. Remove the 2 screws that secure the hidden touch controls bracket. (Figure 13)
6. Disconnect the connector from the hidden touch controls.
7. Remove the 2 screws that secure the hidden touch controls to the bracket. (Figure 14)
8. Seure the new hidden touch control assembly to the the bracket using the previously removed screws.
9. Connect the new hidden touch control assembly.
10. Ssecure the bracket using the previously removed screws.
11. Secure the C-channel by inserting the screws through the semi-circle grooves.
12. Secure the L-channel. Ensure not to insert screws in the holes intended for the mirrored glass bracket(s).
13. Reinstall the electronics cover panel.
14. Replace the QR Code labels provided over the existing QR label on the fireplace (Figure 11) and on the back of
the owner's manual. If using the Flame Connect app, you will need to reconnect your fireplace to the app following
replacement of the hidden touch controls.
15. Reassemble the unit.
Figure 11
QR Code Label
Figure 13
10
L-Channel
Figure 12
Insert screwdriver through
semi-circle grooves to
remove screws
Figure 14
C-Channel
www.dimplex.com