Jet Revelation Reverb V2.0 Manual page 6

Operating your JET Revelation
Using the Pedal
Mix Knob
The mix knob controls the overall blend between the wet and dry signal. Fully counterclockwise is
100% dry signal and no reverb will pass to the output jacks. Fully clockwise is 100% wet signal and
no dry signal will pass to the output jacks. A 50/50 mix is approximately 10 to 11:00.
Decay Knob
The decay knob effects how long the reverb trails. The range is from 50 milliseconds to over 1
minute.
Cntrl 1 Knob
The control knob function changes depending on the algorithm:
Cyan Sky Blue Algorithm - Controls the amount of modulation present in the reverb trails.
The modulation parameters are fixed. Think of this as a volume level; the more you turn it
up, the more present the modulation will be.
White Ice Algorithm - Controls the amount of upper octave shimmer present in the reverb
trails. The decay know and the control 1 knob are interactive with each other. The decay
knob controls how long the shimmer stays in the trails of the reverb; the higher the decay,
the longer the shimmer is present in the trails. The control 1 knob acts as a volume control
for the level of shimmer in the reverb.
Yellow Sub Algorithm - Controls the amount of lower octave in the reverb trails. Think of the
control 1 knob as a volume knob, controlling the level of lower octave in the reverb trails.
Using the Soft-Click Switches
To engage the revelation, do a short press of the bypass switch. The bypass LED will turn on and
all three knobs will be active. You can dial in the sounds any way you like as you are in Live Mode.
To switch between Live Mode and Preset Mode, do a short press of the preset switch. The preset